TASCAM DR-40

Specifications
Recording Media
SD card(64MB~2GB), SDHC card(4GB~32GB)
Recording and Playback Format

WAV / BWF
44.1kHz/48kHz/96kHz, 16/24 bit (Stereo or Mono)
MP3
44.1kHz/48kHz, 32k/64k/96k/128k/192k/256k/320kbps
Power Consumption
2.5W(Max.)
Battery Operation Time
15 hours (continuous operation, phantom power off)
Dimensions
70(W)×155(H)×35(D)mm(Mic Closed)
90(W)×155(H)×35(D)mm(Mic Opened)
Weight
213g(Without Batteries)
Number of Channels
4 Channels(2 Stereo)
Playback Speed Control
(VSA)
50-150% without changing pitch
※Only with 44.1kHz/48kHz
Built-In Microphone
Cardioid Condenser microphones
Supporting both X-Y/A-B microphone settings
EXT MIC/LINE IN

Connector
XLR/TRS Combo Jack (1:GND,2:HOT,3:COLD)
Input Impedance
2.2kΩ(MIC)/10kΩ(LINE)
Nominal Input Level
-19dBV(MIC) / +4dBu (LINE)
Maximum Input Level
-3dBV (MIC) / +20dBu (LINE)
PHONES/LINE OUT

Line Connector
1/8(3.5mm) Stereo mini-phone jack, unbalanced
Output impendence
12Ω
Nominal output level
-14dBV(10kΩ loaded)
Maximum output level
+2dBV(10kΩ loaded)
Headphone

Maximum output
20mW+20mW(32Ω loaded)
Built-in Speaker Output
0.3W (mono)
Low Cut Filter

Cut Off Frequency
40Hz/80Hz/120Hz
USB

Connector
Mini B type
Format
USB2.0 HIGH SPEED Mass Storage Class
Power
Three AA batteries (alkaline batteries or NiMH batteries)
Provided by the USB bus power
AC100 ~ 240V ,50-60Hz (AC adapter optional PS-P515U)
Power Consumption
2.5W(Max.)
Included Accessories
2GB SD Card
Mini USB Cable

Audio Performance
Frequency Response
20Hz~20kHz +1dB/-3dB(Fs 44.1kHz、EXT IN→LINE OUT、JEITA)
20Hz~22kHz +1dB/-3dB(Fs 48kHz、EXT IN→LINE OUT、JEITA)
20Hz~40kHz +1dB/-3dB(Fs 96kHz、EXT IN→LINE OUT)
Total Harmonic Distortion
Less than 0.05%(Fs 44.1/48/96kHz、EXT IN→LINE OUT)
S/N Ratio
Greater than 92dB(Fs 44.1/48/96kHz、EXT IN→LINE OUT)

Computer Requirements
Windows
OS
Windows XP
Windows Vista
Windows 7
CPU/Clock
Pentium 300MHz Min.
Memory
128MB Min.
USB Port
USB2.0 recommended
Macintosh
OS
Mac OS X v10.2 or later
CPU/Clock
Power PC、iMac、G3、G4 、G5 266MHz Min.
Memory
64MB Min.
USB Port
USB2.0 recommended